Need some help? Check out our new Help Centre

Laser Power at start up?

How much power (0-255) is the laser set at when we just start the unit (i.e. keep the red button pressed for few seconds)?

Comments

  • Hi Joel,

    With the laser guard on, the power at this point is below the lasing threshold of the diode, so it will be below 0, if that makes sense.

    With the laser guard off, you will enter 'focusing mode'. This will ramp the power up to approximately 10% (25/255)
  • Kinda makes sense...Thanks for the info...
Sign In or Register to comment.