It looks like you're new here. If you want to get involved, click one of these buttons!
News and Announcements
General Emblaser Discussion
General Software Discusson
Tips & Tricks
Mods / R&D
Need some help? Check out our new
A project I've been working on.
It's a ring box for my daughter's wedding. The box is cut from Cherry on my Camaster Stinger. Here's the top:
Nicely lasered by my Emblaser!!
Very nice, it would seem that you are like me, adding another CNC tool to the armory. I built a 3HP 800mm x 600mm mill/router a couple of years ago that I make various timber and plastic projects on. My main reason for adding the Emblaser to the workshop was to do as you have done, add engraving to finished timber projects. I am working on a didgeridoo for a friend that will be laser engraved with Aboriginal designs to finish if off.
Yes, always adding tools to my shop. I have another 3d printer and one of the 40w lasers coming next week. I had to look up didgeridoo to see what it was. You must make these by hand? I hope you post some pictures of the finished project. What is the plan for applying the designs? Does it have flat sides or round?
I am making the didg on the CNC router, this particular one is a spiral type, I cut two or three pieces depending on the thickness of the stock and the finished size then glue them together.
This will give you an idea of the finished instrument, I will use Emblaser to do the artwork on each of the pieces before glueing.
Powered by Vanilla