Need some help? Check out our new Help Centre

Second Project - 280 gr white paper engraving

Thanks for your help !! Jeffery Woodcock

Settings:

( Analog + Feed Rate )
( 25.0% Feed Rate Change )
( 4826.0000 units/min. )
( Image size in mm: 85.9536w x 135.0264h )
( Pixel Resolution: 0.1524 mm )
( Line Spacing: 0.1524 mm )
( Max. Cut Depth: 255.0000 mm )
( Min. Cut Depth: 10.0000 mm )
( 3rd Axis Safe Position: 0 mm )
( Start Position: image bottom left )
( Horizontal Axis Offset: 0 mm )
( Vertical Axis Offset: 0 mm )
( Engraving Angle: Left 45° )
( Spindle On/Off Enabled )
( GRBL Code w/G28 EOF )
( Metric Mode )
( X Axis Align 0 )
( Y Axis Align 0 )

Comments

  • Settings:

    ( Image File: 24-animal-black-and-white-photography-by-rudi-hulshof )
    ( Analog + Feed Rate )
    ( 25.0% Feed Rate Change )
    ( 4826.0000 units/min. )
    ( Image size in mm: 100.584w x 150.876h )
    ( Pixel Resolution: 0.1524 mm )
    ( Line Spacing: 0.1524 mm )
    ( Max. Cut Depth: 255.0000 mm )
    ( Min. Cut Depth: 10.0000 mm )
    ( 3rd Axis Safe Position: 0 mm )
    ( Start Position: image bottom left )
    ( Horizontal Axis Offset: 0 mm )
    ( Vertical Axis Offset: 0 mm )
    ( Engraving Angle: Left 45° )
    ( Spindle On/Off Enabled )
    ( GRBL Code w/G28 EOF )
    ( Metric Mode )
    ( X Axis Align 0 )
    ( Y Axis Align 0 )
  • WOW,

    Those are absolutely outstanding reproductions of the original images Lorincz!

    Very good job and thanks for sharing.

    Jeff
  • Thank you for your help Jeff !!!
  • Your welcome. Glad I could help.
  • ( Analog + Feed Rate )
    ( 25.0% Feed Rate Change )
    ( 4318.0000 units/min. )
    ( Image size in mm: 91.44w x 137.16h )
    ( Pixel Resolution: 0.1524 mm )
    ( Line Spacing: 0.1524 mm )
    ( Max. Cut Depth: 255.0000 mm )
    ( Min. Cut Depth: 10.0000 mm )
    ( 3rd Axis Safe Position: 0 mm )
    ( Start Position: image bottom left )
    ( Horizontal Axis Offset: 0 mm )
    ( Vertical Axis Offset: 0 mm )
    ( Engraving Angle: Left 45° )
    ( Spindle On/Off Enabled )
    ( GRBL Code w/G28 EOF )
    ( Metric Mode )
    ( X Axis Align 0 )
    ( Y Axis Align 0 )
  • ( Analog + Feed Rate )
    ( 25.0% Feed Rate Change )
    ( 4826.0000 units/min. )
    ( Image size in mm: 91.44w x 130.9116h )
    ( Pixel Resolution: 0.1524 mm )
    ( Line Spacing: 0.1524 mm )
    ( Max. Cut Depth: 255.0000 mm )
    ( Min. Cut Depth: 10.0000 mm )
    ( 3rd Axis Safe Position: 0 mm )
    ( Start Position: image bottom left )
    ( Horizontal Axis Offset: 0 mm )
    ( Vertical Axis Offset: 0 mm )
    ( Engraving Angle: Left 45° )
    ( Spindle On/Off Enabled )
    ( GRBL Code w/G28 EOF )
    ( Metric Mode )
    ( X Axis Align 0 )
    ( Y Axis Align 0 )
  • Very impressive results Lorincz! Looks like you have the PEP5 settings very fined tuned. The white paper sure is giving you very good shading results.

    Thanks again.
    Jeff
  • Are these done using the 3Watt or 4Watt laser unit?
  • 4W at what power setting (switches)??
  • The switch default setting: 011011, 1800mA.
    4W setting: 111111 3000mA (my setting)
  • Terrific, thank you
Sign In or Register to comment.