A friend of mine has just cut an artist's palette on my Emblaser for his daughter's birthday, custom-fitted to her hand size, and with her name engraved on the back.
It may be very simple, but it makes a great customised birthday present.
Bunnings 3mm BC ply
Cutting - 7 passes 300mm/min 100% @ 2.2A (would have been fine with 5)
Engraving - 1000mm/min 70% @ 2.2A
Dremel-sanded the finger hole to smooth the edges, 150/180 grit for the remainder, finished with 2/3 coats of oil based varnish.
Final pics to follow once the varnishing has been finished.