Need some help? Check out our new Help Centre

1mm Cardboard - White/Grey: Cutting results

edited May 2015 in Tips & Tricks
Hey,
Just would like to share my first test results with 1mm "artist" cardboard (it´s 18h since I got the Emblaser). I had had this question myself... Buy the way the Emblaser is awesome! This cardboard has a good thickness for models, it´s stiff enough to make structures with it. I will be testing thicker dimensions soon.

Seems to me that you get a good throughout cut and with little soot around the edges with ~ 60%,2pass,300mm/min.
Or even lesser sooting but more "bridges" left in the cardboard...with 80%,1pass,300mm/min. (my laser may be a bit out of focus due to excitement)

IMG_20150527_140941 copy


Sign In or Register to comment.